Fuji Xerox ApeosPort-V C5580 Administrator's Manual page 584

15 Problem Solving
6
Remove the jammed staples (1), and return the
metal part pushed upward in step 5 to its
original position (2).
Be careful in removing jammed staples.
7
With grasping the orange lever of the staple
cartridge, push the staple cartridge into its
original position until it clicks into place.
8
Close the finisher front door.
Note
If you cannot remove jammed staples even after you perform the above procedure, contact
our Customer Support Center.
Booklet Staple Jams in Booklet Staple Cartridge (for C3 Finisher with Booklet
Maker)
The following describes how to clear staple jam occurred in the booklet staple cartridge of
the C3 Finisher with Booklet Maker (optional).
1
Make sure that the machine is not operating,
and open the finisher front door.
2
Pull out the booklet unit.
15
584
CAUTION
• If the finisher front door is not completely closed, a message will appear and the machine remains
paused.