Fuji Xerox ApeosPort-V C5580 Administrator's Manual page 467

Error Code
016-360 [Cause] An error occurred.
016-362
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
016-363
on the machine power. If the same message is displayed again, contact our Customer
016-364
Support Center.
016-365
016-366
016-367
016-368
016-369
016-370
016-371
016-372
016-373
016-374
016-375
016-376
016-377
016-378
016-379
016-380
016-381
016-382
016-400 [Cause] The user name or password for 802.1x authentication did not match.
[Remedy] Confirm and correctly enter the user name or password. If the error still is not resolved,
check whether the network environment is set correctly.
016-401 [Cause] The 802.1x authentication method cannot be processed.
[Remedy] Set the authentication method of the machine to the same method as set for the
authentication server.
016-402
[Cause] The authentication connection timed out.
[Remedy] Confirm the network connection and switch setting of the authentication device
physically connected to the machine via a network, and check whether it is connected
to the machine correctly.
016-403
[Cause] The root certificate did not match.
[Remedy] Confirm the authentication server and store the root certificate of the server certificate
of the authentication server into the machine.
If you cannot acquire the root certificate of the server certificate, set [Server Certificate
Verification] of [IEEE 802.1X Settings] to [Disabled] on the touch screen.
016-404 [Cause] An internal error occurred.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
016-405 [Cause] An error occurred in the certificate stored in the machine.
[Remedy] Initialize the certificate.
For more information on initializing certificates, refer to "Delete All Certificates/Initialize Settings" (P.158).
Cause and Remedy
Error Code
15
467