Loading Postcards - Fuji Xerox ApeosPort-V C5580 Administrator's Manual

Loading Tab Paper in Tray 6 (HCF B1-S)
Note • When loading heavyweight paper, be sure to adjust the position of the weight switch buttons. For
1
Pull out the tray towards you until it stops.
CAUTION
Make sure to pull out the tray slowly.
When the tray is being pulled out with
force, the tray may possibly hit your
knees or other parts of your body causing
injuries.
Important • While the machine is processing a job, do not pull the tray out that the job uses.
• To prevent paper jams or misloading, do not load new paper into the tray until the tray is empty.
2
Remove any paper loaded in the tray.
3
With the side to be copied or printed on facing
up and with the tab side to the left, load
approximately 100 to 500 sheets of paper in
the tray and align the edges of the paper in the
arrow direction (1). Pinch the long-side paper
guide and slide it to the desired paper size (2).
4
Likewise, load the remaining paper and align
the edges of the paper in the arrow direction
(1). Pinch the left short-side paper guide and
slide it to the desired size of the tab paper (2).
Important • Do not load paper exceeding the maximum
• If the number of sheets is 100 or less, the
• Position the guides correctly to match the
5
Push the tray in gently until it stops.

Loading Postcards

Postcards can be loaded in Tray 5 (Bypass) and the HCF B1-S (Tray 6).
For how to load a postcard in Tray 5 (Bypass), refer to "Loading Paper in Tray 5 (Bypass)" (P.47).
Note • Carefully fan the paper before loading it in a tray. Otherwise, paper jams may occur or multiple
• When using postcards, you need to set the paper type for the paper tray to [Postcards], and the
more information, refer to "About Weight Switch Buttons" (P.61).
Remove any paper remaining in the tray and then load the paper on newly loaded paper.
fill line. It may cause paper jams or machine
malfunctions.
paper guides touch too tightly against the
paper, causing paper to deform and resulting
in paper jams.
paper size. Otherwise, the paper may not be
fed properly, resulting in paper jams.
sheets may be fed to the machine simultaneously.
paper weight corresponding to the postcard loaded in the tray. For the setting, refer to "Changing
the Paper Settings" (P.63).
Loading Tab Paper/Postcards/Envelopes
2
55