Fuji Xerox ApeosPort-V C5580 Administrator's Manual page 514

15 Problem Solving
Error Code
026-721 [Cause]
[Remedy] Check the following conditions:
026-722 [Cause]
[Remedy] Initialize the USB memory device on a computer with the following file format, and then
Note
026-723 [Cause]
[Remedy] 1)Check that the medium is not inserted or removed, or the other medium is not
026-724 [Cause]
026-725
[Remedy] Contact our Customer Support Center.
026-726
[Cause]
[Remedy] Modify the machine configuration information in the print driver screen to match the
026-727
[Cause]
[Remedy] Take one of the following measures:
026-729 [Cause]
[Remedy] For 1), check whether the network cable is correctly connected or check the amount of
15
Note
026-730 [Cause]
[Remedy] Check whether the paper guides are correctly positioned in the tray, and then try again.
026-735 [Cause]
[Remedy] No measure is required.
026-736
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
514
Cause and Remedy
An error occurred while operating the Store to USB service.
 The USB memory device is inserted into the USB memory slot.

The USB memory device is accessible from your computer.

The unencrypted USB memory device is used.
The USB memory device is not initialized.
execute the operation again.

Supported file formats: FAT12, FAT16 (FAT), FAT32
• NTFS is not supported.
• A software-encrypted USB memory device is not supported.
If the error still is not resolved, contact our Customer Support Center.
The machine failed to access to the medium.
inserted, while the machine is referencing the medium.
2)Check that the file in the medium can be accessed via a computer.
An error occurred while connecting to the EP system via the Internet.
The machine configuration information at a print job specification does not match the
actual machine configuration.
actual machine configuration.
Probable causes are as follows:
1)Unusable characters are included in the path name of the file location.
2)The length of the path name of the file location (including extension) exceeds the
number of characters available.
1)Change the path name of the file location.
2)Set the path in the range of 1 to 255 bytes.
Probable causes are as follows:
1)An error occurred during WSD communications.
2)Application other than [Windows Fax and Scan] was used to scan a document on the
scanner (WSD).
available memory of the destination device.
For 2), Use [Windows Fax and Scan] to scan. If using another application, set the
document on the document glass.
• WSD stands for Web Services on Devices.
The size of paper loaded in the specified tray is unknown.
When authentication succeeds, all jobs are canceled because there is a pending job.
An internal error occurred while sending the scanned document to the HTTP server.
Support Center.