Fuji Xerox ApeosPort-V C5580 Administrator's Manual page 322

7 Printer Environment Settings
 Spool Destination for Jobs
([Properties] > [General Setup] > [Memory Settings] > [LPD])
Note
 Receiving buffer size for Port 9100
([Properties] > [General Setup] > [Memory Settings] > [Port 9100])
 Port Settings
 IP Mode
 Host Name
 IPv4
- IP Address Resolution
- Port Settings
- IP Address
- Subnet Mask
- Gateway Address
 IPv6
- Enable Manual Address
- IP Address
- Link-Local Address
- Gateway Address
 Domain Name
 DNS Configuration
- IPv4
7
- IPv6
 DHCP/DDNS
WINS Server

 Port Number
 TBCP Filter
Note
 Connection Time-Out
 Maximum Number of Sessions
Note
 TCP-MSS Mode
 IPv4 Subnet Mask when TCP-MSS Mode is enabled
 IP Filtering
- IPv4 Filtering
- IPv6 Filtering
322
• The spool destination can be configured when the LPD port is enabled.
• The TBCP filter can be configured when the Adobe PostScript 3 Kit (optional) is installed.
• The Maximum Number of Sessions can be configured when the LPD port is enabled.