D Remote Management Controller; Overview Of The Remote Management Controller - Fujitsu PRIMERGY TX120 User Manual

Appendix
D Remote Management Controller
The Remote Management Controller is installed on the server as a standard feature.
It can be operated remotely by connecting to the administrative PC. To use the
Remote Management Controller function, an optional Remote Management Ctrl
Upgrade (PG-RMCU1) is required.
This section explains functions and features of the Remote Management Controller
and the preparation of using it.
D.1

Overview of the Remote Management Controller

PRIMERGY TX120 has the Remote Management Controller on the baseboard. The Remote
Management Controller makes the high-quality, high-reliability remote service board function possible.
To use the console redirection function and the remote storage function, the license key of optional
Remote Management Ctrl Upgrade kit (PG-RMCU1) is necessary. For details of Remote Management
Ctrl Upgrade kit (PG-RMCU1), refer to "D.4 Remote Management Ctrl Upgrade kit (PG-RMCU1)"
( pg.213).
Features of the Remote Management Controller
• The Remote Management Controller and LAN are provided on the baseboard. This makes possible to
control power supply and reset of the server without depending on the state of the server.
• The console redirection function and the remote storage function can be used by optional Remote
Management Ctrl Upgrade kit (PG-RMCU1).
• It provides with LAN interface.
• It has the server monitoring function (monitoring server's hang/temperature/voltage).
• It has the server abnormality notification function (it is possible to notify abnormally at the server
hang).
• It is possible to display the server status and control power supply/reset of the server by using the
Web interface.
When the baseboard is replaced, the Remote Management Controller may have to be set again. In
case of reconfiguration, write down the set values in configuration sheets.
210