Creating Maintenance Tools; Creating "Server Management Tools" Disk - Fujitsu PRIMERGY TX120 User Manual

Chapter 5 Operations after OS Installation

5.4 Creating Maintenance Tools

This section explains how to create tools for maintaining the server.
Maintenance tools are created with the FloppyBuilder function of ServerStart.
With the FloppyBuilder function of ServerStart, you can create the following tools:
• "Server Management Tools" disk
• DOS Diskette
FloppyBuilder can be used under environments such as:
• The ServerStart system started on a client computer (recommended)
• The ServerStart system started from PRIMERGY Startup Disc on the server
When creating the tools on a client computer, it is necessary to install ServerStart on the client
computer beforehand.
If ServerStart of a different version is installed in the computer, make sure to uninstall the ServerStart.
Then perform installation again. For details on how to uninstall ServerStart, refer to "2.4.2 Uninstalling
ServerStart" ( pg.47).
Check that a USB floppy disk drive is connected.

5.4.1 Creating "Server Management Tools" Disk

Start up ServerStart and confirm that the FloppyBuilder window is displayed.
1
Start up ServerStart and click [FloppyBuilder].
For details on procedures for starting up ServerStart, refer to "
2
Click [Server Management Tools].
3
Click the tool to be created.
Insert the prepared floppy disk by following the message.
4
Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The respective tools will be created automatically. When a message appears indicating that the
disk is created, click [OK] and eject the disk.
5
Fill the following items on the label of the floppy disk.
• The model name of the server
98
Starting ServerStart" ( pg.72).