Chapter 7 Installing Hardware Options
9
Install the internal hard disk unit bay / internal DVD-ROM drive bay.
Put the projections on the bottom face of the internal hard disk drive bay / internal DVD-ROM
drive bay to the holes of the optional bay, and slide it to be fixed.
10
Connect the cables which are removed in Step 4 to the internal hard disk unit /
internal DVD-ROM drive unit.
Be sure to connect cables to the same connector.
11
Attach the reinforcing bar.
12
Remove the optional bay panel from the cover of the server.
Take off the tab inside of the panel to remove it.
Optional bay panel
13
Attach the cover.
144
Internal hard disk drive bay / internal DVD-ROM drive bay
the bottom face
Projection
Cover of the server