Chapter 7 Installing Hardware Options; Before Installing Hardware Options - Fujitsu PRIMERGY TX120 User Manual

Chapter 7 Installing Hardware Options

7.1 Before Installing Hardware
Options
The following types of hardware options can be installed in this server.
DVD-ROM drive unit
2.5-inch internal hard disk unit bay
Optional unit bay
Front
If you purchased optional devices, check the packaged items supplied with the optional devices before
installing these devices. For the optional devices listed below, refer to the following to check to see the
packaged items.
• Memory
• Internal hard disk unit
When installing and removing options, make sure to use the removed screws on the same devices that
were last installed or removed. Failure to do so can damage the device.
The types of optional devices listed in this manual are liable to be updated without any notice. Please
be forewarned.
When installing optional products (such as internal/external options and USB equipments), be sure to
use the products in a system configuration diagram for stable PRIMERGY server operations. Fujitsu
does not warrant that the server related products will operate properly if you use the unauthorized third
party options.
120
Memory modules
"B.1 Memory" (pg.202)
"B.2 Internal Hard Disk Units" (pg.202)
Rear
Expansion card