Os Installation Wizard - Fujitsu PRIMERGY TX120 User Manual

Be sure to set the active partition on drive C.
3
Set items and click [Format].
The partition is formatted.
4
When the formatting is completed, click the [File] menu – [Exit].
Disk Manager closes and the display returns to the Expert mode window.

3.2.3 OS Installation Wizard

Set computer information, user information, and the network protocol.
ServerStart can configure multiple network patterns. When configuring a domain controller, refer to
"Using ServerStart to Configure the Network".
The setup windows vary depending on the OS to be installed. For example, operation on Windows
Server 2003 R2 is given below. Windows Server 2003 R2 is corresponding to your OS to be installed.
1
Click [Installation Wizard for MS Windows Server 2003].
A message prompts you to specify the configuration file.
2
Click [No].
The [Windows Installation] window appears.
PRIMERGY TX120 User's Guide
61