Appendix F Starting HII Configuration Utility
F.2 Method of identifying position where SAS RAID Controller is mounted
4.
Check the Slot Numbers in HII Configuration Utility [Controller management] window.
Slot Numbers is displayed at the row of PCI Slot Numbers in HII Configuration Utility [Controller
management] window.
In example of
- In Case that Slot Numbers is not zero.
The position where SAS RAID Controller is mounted can identify using by Slot Numbers. For the
correspondence between PCI slot mounting locations and Slot Numbers, see Appendix D.2
correspondence between PCI slot mounting locations and Slot Numbers in PRIMEQUEST 2000
series Administration Manual (CA92344-053).
- In Case that Slot Numbers is zero.
This shows that SAS RAID Controller is mounted on SB. If there is only one SB in the partition, the
SAS RAID Controller is mounted on the SB. There is additional procedure if there are two SBs or
more in the partition. For the additional procedure, see
SAS RAID Controller is mounted on
In example of
SAS RAID Controller is 49 and the SAS RAID Controller is mounted to PCI Express Slot#1 on DU#1.
FIGURE F.6 HII Configuration Utility [Controller Management] window
FIGURE F.6 HII Configuration Utility [Controller Management]
SB.
FIGURE F.6 HII Configuration Utility [Controller Management]
F.3 Method of identifying position where
152
, Slot Numbers is 49.
, Slot Numbers of the
CA92344-0536-04