Security; Hardware Security - Fujitsu PRIMERGY TX120 User Manual

9.4 Security

Security features are provided in order to protect the server hardware and software
from theft. Additional security functions, which prevent unauthorized use, provided by
BIOS Setup Utility are also available to help maintain a highly reliable data security
system.

9.4.1 Hardware Security

This section describes security function of hardware.
Locking the drive cover
Lock the drive cover to protect the hardware (hard disk units and bay options) in the server from theft or
tampering.
Turn the key clockwise to lock the cover.
Do not lose the drive cover key. If the key is lost, contact an office listed in the "Contact Information" of
"Start Guide".
For instructions on opening the drive cover, refer to "1.4.1 Opening the Drive Cover" ( pg.28).
Using the lock plate
The theft can be prevented by passing the commercial wire etc. through the lock plate on the rear of the
server and fixing the server to the pillar etc.
"1.3.2 Server (rear view)" (pg.24)
PRIMERGY TX120 User's Guide
189