Fujitsu PRIMERGY TX120 User Manual page 161

Item
System Event Log
SDRR Browser
LAN Settings
LAN Settings submenu
Use this submenu to configure LAN settings when performing the remote operation by using
RemoteControlService.
Item
DHCP • Disabled (Initial value)
• Enabled
Local IP address [192.168.120.101] (Initial value)
Subnet mask [255.255.255.000] (Initial value)
Gateway address
[000.000.000.000] (Initial value)
table: IPMI submenu
Setting
Displays the system event logs. Press the [Enter] key to display the system event
log window. Use the [+] [-] keys to display previous and subsequent entries.
Displays sensor information. The SDRR Browser is displayed by pressing [Enter].
Configures the LAN settings of the Remote Management Controller port. This
setting is required when performing the remote operation using
RemoteControlService. Press the [Enter] key to display the "
submenu" ( pg.161) screen.
table: LAN Settings submenu
Setting
Sets whether to obtain LAN IP address of the Remote
Management Controller port from the DHCP server.
Enter an IP address for the Remote Management
Controller port.
Sets the subnet mask of the Remote Management
Controller port that is specified in [Local IP address].
Sets the gateway address of the Remote Management
Controller port that is specified in [Local IP address].
PRIMERGY TX120 User's Guide
Description
LAN Settings
Description
161