Advanced Menu - Fujitsu PRIMERGY TX120 User Manual

Item
Boot Sequence

8.2.5 Advanced Menu

This menu is for settings of peripheral devices and PCI device options.
Main Advanced
Setting items on this menu to incorrect values
may cause your system to malfunction.
Peripheral Configuration
PCI Configuration
Advanced System Configuration
Power On/Off
IPMI
Reset configuration Data:
F1 Help
Esc Exit
Item
Peripheral Configuration
PCI Configuration
Advanced System
Configuration
Power On/Off
IPMI
Reset Configuration Data
table: Boot Options submenu
Setting
• CD-ROM Drive
• Diskette
• Hard Drive
• Legacy LAN Card
• MBA V9.4.5 Slot
0900
Security Server
Setup Warning
[No]
-/+ Change Values
Select Item
Select Menu
Enter Select
table: Advanced menu
Setting
Configures settings of serial port, parallel port, etc. Press the [Enter] key to
display the "8.2.6 Peripheral Configuration Submenu" ( pg.156) screen.
Configures PCI device settings. Press the [Enter] key to display the "8.2.7 PCI
Configuration Submenu" ( pg.157) screen.
Configures additional settings. Press the [Enter] key to display the "8.2.8
Advanced System Configuration Submenu" ( pg.158) screen.
Configures power on/off settings. Press the [Enter] key to display the "8.2.9
Power On/Off Submenu" ( pg.159) screen.
Configures server management settings. Press the [Enter] key to display the
"8.2.10 IPMI Submenu" ( pg.160) screen.
• Yes
• No (Initial value)
PRIMERGY TX120 User's Guide
Description
To set the order of devices in reading the OS, press the
[Enter] key.
Use the [+] [-] keys to change the priority order for the
selected device. Booting from a selected device can be
disabled with the [Space] key. (The mark "!" is displayed by
the name of the disabled device.) If a non-existing device is
displayed, delete it from the list by pressing the [*] key.
Exit
Item Specific Help
Setup Defaults
F9
Save and Exit
Sub-Menu F10
Description
Sets whether to initialize the Extended System
Configuration Data (ESCD) where the system resources
are recorded.
155