Fujitsu PRIMERGY TX120 User Manual page 72

Chapter 4 Manual OS Installation
Starting ServerStart
If ServerStart has already been started, you do not have to restart it. If it is not started, perform the
following startup procedures.
For creation on a client computer
1
Click [Start] – [All Programs] – [Fujitsu Siemens ServerStart] – [ServerStart
(start from DVD)].
ServerStart starts up and the [Welcome to ServerStart] window appears.
For creation on the server
Check that a USB floppy disk drive is connected before turning on the server.
1
Turn on the server and insert PRIMERGY Startup Disk immediately.
ServerStart starts up and a message prompts you to insert the ServerStart floppy disk.
2
Select [RAM Disk] and click [Next].
The [Initialization of ServerStart core running] window appears and the initialization operation
launches. In some cases, initialization operation may take a few minutes, depending on hardware
configuration. After completion, the license agreement window appears.
72