Fujitsu PRIMERGY TX120 User Manual page 51

2
Insert the ServerStart floppy disk supplied with the server. Make sure that "on
local drive (floppy/USB stick)" and "A:" are selected and click [Continue].
Set the ServerStart floppy disk in the write-enabled state.
To install the OS other than Windows Server 2003 x64 on the server which has no floppy disk
drive, select [RAM Disk] and click [Continue]. To install the OS without using the floppy disk,
you cannot install Windows Server 2003 x64 or configure RAID by using ServerStart. To con-
figure RAID, configure the RAID manually in advance, and then start up the ServerStart.
The [Initialization of ServerStart core running] window appears and the ServerStart initialization
process starts. Depending on hardware configuration, this process may take a few minutes. After
completion, the license agreement window appears.
PRIMERGY TX120 User's Guide
51