Installing Linux - Fujitsu PRIMERGY TX120 User Manual

Chapter 4 Manual OS Installation
9
Install a Display driver.
1. Insert the PRIMERGY Startup Disc into the CD/DVD drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the PRIMERGY Startup Disc.
[CD/DVD drive]:\DRIVERS\VIDEO\MATROX\w2k_w2k3\ServerEngines
G200e_Kronos1_SETUP.exe
The installation wizard starts up.
3. Click [Next]. Follow the instructions on the window for the installation.
4. When the installation is complete, eject the PRIMERGY Startup Disc from the CD/
DVD drive, and click [Finish] to restart the system.
10
Apply Windows Server 2003 Service Pack.
For details, refer to the description on the window.
When applying the Service Pack, a driver may be replaced with the driver in the Service Pack.
For more information, refer to the manual supplied with each hardware.
11
Installing high reliability tools.
To ensure stable server operation, refer to "Chapter 6 High Reliability Tools" ( pg.111) and
install high reliability tools. RAID management tool will also be installed at the same time.
The installation of Windows Server 2003 has completed.
Before starting operation
After OS installation, refer to "Chapter 5 Operations after OS Installation" ( pg.87) and perform the
necessary procedures.

4.2.3 Installing Linux

For the use of Linux, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).
80