Fujitsu PRIMERGY TX120 User Manual page 34

Chapter 1 Overview
2
Have the label side of the CD/DVD forward, position the hole of the disc to the
projection on the center of the tray, and then set the CD/DVD firmly until it
clicks.
If the disc is not set properly, it may not be played or ejected.
CD/DVD tray
3
Press the CD/DVD eject button.
The tray is inserted into the server and CD/DVD is set.
Ejecting a CD/DVD
To eject the CD/DVD, make sure that the CD/DVD access LED is off and then press the CD/DVD eject
button.
34
When CD/DVD is set, the CD/DVD access LED is lit. To do next operation, make sure that the
LED is off.