Security Menu - Fujitsu PRIMERGY TX120 User Manual

Chapter 8 Configuring Hardware

8.2.11 Security Menu

This menu is for security options.
Main Advanced
Setup Password:
System Password:
Set Setup Password:
Setup Password Lock:
Set System Password:
System Password Mode:
System Password Lock:
System Load:
Setup Prompt:
Virus Warning:
Diskette Write:
Flash Write:
Help
F1
Esc Exit
Item
Setup Password
System Password
Set Setup Password
Setup Password Lock
Set System Password
162
Security Server
Not installed
Not installed
[Press Enter]
[Standard]
[Press Enter]
[System]
[WOL Skip]
[Standard]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Security menu
Setting
Displays the setting of a password (setup password) that is used for security of
BIOS setup.
• Not Installed: A password has not been set.
• Installed: A password has been set.
Displays the setting of a password (system password) that is used for security of
system startup.
• Not Installed: A password has not been set.
• Installed: A password has been set.
Sets a setup password. Once the password is set, password entry is required when
BIOS Setup Utility is started up.
Press the [Enter] key to display the password entry window. Enter the setup
password. For more details, refer to "9.4.2 Security against Unauthorized Use"
( pg.190).
• Standard (Initial value)
• Extended
Sets a system password. Once the password is set, password entry is required when
BIOS Setup Utility is started up.
This password can be set when [Setup Password] has been set.
Press the [Enter] key to display the password entry window. Enter the setup
password. For details, refer to "9.4.2 Security against Unauthorized Use"
( pg.190).
Exit
Item Specific Help
F9 Setup Defaults
Save and Exit
Sub-Menu F10
Description
Keyboard can be locked while an expansion card is
initialized. When the expansion card that can
execute the setup during system startup is installed,
the setting of the expansion card can be protected
by locking the keyboard.
You can set this item only when [Setup Password]
has been set.