Other Notes On Operation - Fujitsu PRIMERGY TX120 User Manual

Chapter 5 Operations after OS Installation
BIOS Setup Utility setting
To manage the power supply via a LAN, configure the setting as follows in BIOS Setup Utility. It has
been set to [Enabled] as the initial setting.
1
Start up BIOS Setup Utility.
"8.2.1 Starting and Exiting BIOS Setup Utility" (pg.149)
2
From the [Advanced] menu, select the [Power On/Off] submenu, and press the
[Enter] key.
The [Power On/Off] submenu window appears.
3
Set [Power On Source:LAN] to [Enabled].
4
Save changes and exit BIOS Setup Utility.

5.5.5 Other Notes on Operation

Unnecessary files
After OS installation is completed, folders named Runonce and Runonce 2 may be left in the drive
where the OS has been installed. Delete these folders since those are not necessary for the system
operation.
Notes on 24-hour operation
Automated system operation
When performing automated system operation, enhancement of the safety operation with this server
against unexpected accidents is necessary. Employ such measures as introducing disaster-prevention
provisions and stationing responsible for disaster prevention (such as a security guard or janitor) in the
building.
Unintentional power-off prevention
It is recommended to employ a dedicated power supply device (such as a power distribution board) to
prevent accidental power shut-offs.
102