How To Create Driver Disks [Floppybuilder Function] - Fujitsu PRIMERGY TX120 User Manual

For Windows Server 2003
Expansion card / onboard controller
Chipset
Graphic controller
Onboard SAS controller
Onboard LAN
LAN card (PG-1853L / PG-1882L / PG-1892L)
LAN card (PG-2861L / PG-288L / PG-289L)
SCSI card (PG-1301L)
Other expansion cards
*1: Created by the ServerStart FloppyBuilder function

4.1.2 How to Create Driver Disks [FloppyBuilder function]

Driver disks are created from PRIMERGY Startup Disk by using the ServerStart FloppyBuilder
function. The FloppyBuilder function is available in the following environments.
• Starting up the ServerStart system on a client computer (recommended)
• Starting up the system from PRIMERGY Startup Disk on the server
When creating driver disks on a client computer, it is necessary to install ServerStart on the client
computer beforehand. Install it according to "2.4 Preparation for Using ServerStart on a Client
Computer" ( pg.45).
If a different version of ServerStart has been installed, uninstall it and install the proper version. For
details on how to uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" ( pg.47).
table: Drivers required for installing Windows Server 2003
Driver provided with PRIMERGY Startup Disc
Driver provided with PRIMERGY Startup Disc
Integrated Mirroring SAS Driver Windows 2000/2003 Drivers
Disk V1.25.05.00
TX120 Onboard LAN Driver Windows 2003 Drivers Disk
Ver10.39b
PG-185x/186x/188x/189x LAN Driver Windows 2000/2003
Drivers Disk Ver11.2
PG-286x/288x/289x LAN Driver Windows 2000/2003 Drivers
Disk Ver11.2
Standard driver provided with the OS
Driver supplied with the expansion card
PRIMERGY TX120 User's Guide
Driver
*1
*1
*1
*1
71