Fujitsu PRIMERGY TX120 User Manual page 127

5
To replace the memory module, open outward the retention clips on both sides
of the slot.
6
Open the retention clips on both sides of the slot and insert the memory
module.
Align a notch of the memory module to correspond with the memory slot and insert the module
perpendicularly to the slot.
When the module is correctly inserted, the retention clips on both sides will close. Then, check
that they secure the memory module.
If the retention clips are not securely closed, push them with your fingers to close.
7
Attach the reinforcing bar.
8
Attach the cover.
• Make sure not to open the clips outward too quickly because the
memory module may pop up, which could cause damage.
• An improperly inserted memory module could cause a fire. Do not
insert the memory module on the wrong side.
PRIMERGY TX120 User's Guide
127