Installing Internal Hard Disk Units; Where To Install Internal Hard Disk Units - Fujitsu primergy TX150 User Manual

7.5 Installing Internal Hard Disk
Units
This section explains how to install internal hard disk units.
Before adding an internal hard disk unit, install the OS and turn off the server.

7.5.1 Where to Install Internal Hard Disk Units

Install internal hard disk units in 3.5-inch storage bay.
• When installing or removing internal hard disk units, turn off the server, all
peripheral devices, and any other connected devices. Also unplug all power
cables from the outlet.
Failure to do so can cause electric shock.
• Install our genuine internal hard disk units only. Failure to do so may cause a
device failure, fire, or electric shock.
• When installing or removing hardware options, make sure to remove the
screws on the specified points only.
There is a chance of injury if screws other than those on the specified points
are removed. This could also damage the server.
• Touch only the specified part of the printed circuit board.
Failure to do so could cause injury and also damage the server.
3.5 inch storage bay 4
3.5 inch storage bay 3
3.5 inch storage bay 2
3.5 inch storage bay 1
PRIMERGY TX150 S4 User's Guide
7
201