Internal Interrupt (Timer, Serial Interface) - NEC PD17062 Datasheet

Table 11-3 Interrupt Request Issuance by IEGNC Flag Change
IEGNC or IEGVSYN flag change
1 0
(Fall) (Rise)
1 0
(Rise) (Fall)

11.8 INTERNAL INTERRUPT (TIMER, SERIAL INTERFACE)

There are two types of internal interrupts: the timer interrupt and the serial interface interrupt.
11.8.1 Timer Interrupt
The timer interrupt function can issue interrupt requests at a specified time interval.
An interval of 100 ms, 20 ms, or 5 ms can be selected.
See Chapter 12 for details.
11.8.2 Serial Interface Interrupt
The serial interface interrupt function can issue an interrupt request when a serial out or serial in operation
terminates.
Therefore, interrupt requests are mainly issued by the serial clock.
See Chapter 16 for details.
INT or V pin Whether interrupt
NC SYNC
request is issued
Low
High
Low
High
IRQNC flag
Not issued No change
Issued
Issued
Not issued No change
PD17062
Set
Set
123