Left Crankcase Half - Beta Enduro RR 350 2015 Workshop Manual

B
Extraction of countershaft bearing.
2
Inside safety plates of left crankshaft half.
4
Outside safety plate of left crankshaft half counter-
shaft.
A
1
3
2.12.1.2 EXTRACTION
SHAFT SUPPORT BEARING
To extract the countershaft bearing, use the ex-
tractor A (code 3625081) together with extrac-
tor B (code 006140160000). It is recommen-
ded to apply the two aluminium plates to be
placed between the legs of the extractor and
the crankcase half.

2.12.2 LEFT CRANKCASE HALF

Three safety plates are present on the left
crankcase half. Two are applied on the inside
and one on the outside.
The plates 1 on the inside are the ones relative
to the crankshaft support bearing of the gear-
box. They can be disassembled by removing the
two screws 2.
The plate 3 is the one relative to the bearing
which supports the countershaft. It can be di-
sassembled by removing the screw 4.
For checking and cleaning part of the lubrication
circuit, it is advised to use compressed air in
the piston 5 oil jet.
5
2
OF COUNTER-
51