Beta Enduro RR 350 2015 Workshop Manual page 34

2
10
Clutch cap 11 and four screws 10.
12
13
Pressure plate unit 12 and clutch disc pack 13.
Removal of disc spring assembly.
15
14
Opening safety washer with chisel.
32
Remove the 4 screws 10 which fasten the clutch
cap 11 to the inner hub.
11
Remove the clutch cap together with the four wa-
shers and relative springs.
Extract the whole pressure plate unit 12 and the
clutch disc pack 13.
Remove special driven disc and the disc spring as-
sembly.
In order to complete the disassembly of the clutch
unit, open the safety washer 14 using a chisel or
similar tool and remove the nut 15.