Beta Enduro RR 350 2015 Workshop Manual page 37

3
4
5
Gear unit for oil pump control.
1) Gear meshing with clutch gear;
2) Idler wheel
3) Oil pumps control gear;
4) Circlip;
5) Thrust washer;
6) Benzing ring
2
1
Disassembly of high-pressure pump cover.
4
High-pressure pump. 4) Internal rotor; 5) External ro-
tor; 6) Roller.
1
2
3
6
5
2.5.1 OIL PUMPS CONTROL GE-
ARS
The two oil pumps are controlled by a gear unit
driven by the clutch gear.
In detail, gear 1 meshes with the clutch case,
and 2 is the oil pump control gear.
To dismount gear 1, remove circlip 3 and thrust
washers 4 (one below the gear).
To disassemble gear 2, simply remove the Benz-
ing ring 5.
2.5.2 HIGH-PRESSURE
PUMP
The high-pressure pump, located in the exter-
nal right-hand side crankcase, is enclosed un-
der the cover 1 which can be disassembled by
removing the roller 2 and the three screws 3.
Having removed the cover, extract the internal
rotor 4, the external rotor 5 and the roller 6.
2
OIL
35