Beta Enduro RR 350 2015 Workshop Manual page 28

2
Starter flywheel removal (carburettor version) with
special gear puller A.
Starter flywheel removal (injection version) with spe-
cial gear puller A.
7B
Flywheel 7a (carburettor version), 7b (injection ver-
sion), nut 6 and special washer 8.
26
A
A
6
8
7A
To remove the flywheel, screw the relevant extrac-
tor A (code 3625173) onto the threaded segment
on the flywheel and, using a box spanner, tighten
the screw on the extractor.
In the image at the side, the flywheel 7 (rear view),
the special elastic washer 8 and the tightening nut
6.