To block the crankshaft, apply only the screw 38 to
the crankcase.
150Nm
Nut on left side of crankshaft.
3.7
BLoCKING
CRANKSHAft
toP DEAD CENtRE AND
tIGHtENING
oN tHE LEft SIDE of
tHE CRANKSHAft
To block the crankshaft in the Top Dead
Centre, insert the special conical-end screw
38, without applying washer 37, or the special
engine locking tool, code 006140110000,
in its seat on the right crankcase. Once the
crankshaft is positioned at the Top Dead
Centre, tighten all the way.
Spread the threading on the left-hand side
of the crankshaft with medium strength th-
readlocker. Tighten the nut using the special
socket wrench A (code 006140020000) at a
torque of 150Nm.
3
tHE
At
tHE
tHE
NUt
73