3
Insertion of clutch rod in housing B.
10Nm
8
Application of gasket 5, actuator 6, screw 7 M6x30
and two screws M6x20.
96
B
7
5
6
Insert the clutch rod in the seat B from the left side
of the engine, turning the smaller section towards
the inside of the engine.
Apply the gasket 5, the complete hydraulic actuator
6 the M6x30 screw 7 and the two M6x20 screws 8
to the left crankcase half. Tighten the three screws
at a torque of 10Nm.