EXPLODED VIEW OF GEARSHIFT
5) Thrust washer 14x30x1;
6) Gearshift return spring;
7) Spring guide;
8) Pawl return spring;
9) Movable pawl;
10) Gearshift drive shaft.
Gearshift drive shaft: note the positioning of the
gearshift return spring.
For reassembly, couple the movable pawl 9 to
the drive shaft 10 and, while compressing it,
insert the spring 8 between the movable pawl
and the drive shaft. Then apply the spring gui-
de 7, the gearshift return spring 6 and finally
the 14x30x1 thrust washer 5.
The gearshift return spring must be positio-
ned as in the figure to be able to carry out its
function.
3
75