Beta Enduro RR 350 2015 Workshop Manual page 142

4
140
Make sure the filter box sleeve is correctly inserted
inside the carburetor, fasten the two filter box side
and manifold side straps.
In the carburettor versions, set the gas cables on
the right side of the frame and make them pass
through the head connections.
CLOSE
In the injection versions, set the gas cable on the
left side of the frame and make it pass outside the
head connection.
Apply the gas cables to the carburettor/throttle
body and tighten the nuts.
OPEN
Note (carburettor versions): the gas cable that
says "OPEN" must be inserted in the bottom slot,
the one that says "CLOSE" in the upper slot
Attention! At the end of the operation, check for
correct gas play.