Beta Enduro RR 350 2015 Workshop Manual page 41

2
Primary gear 1 and relative nut 2.
Extraction of primary gear with appropriate extractor
A.
1
2
Primary gear 1, complete with free wheel 2 and spe-
cific circlip 3.
1
A
3
2.7 PRIMARY GEAR
The primary gear 1, located in the right crankca-
se, is fastened to the crankshaft. In order to
disassemble it, remove the nut 2 which must
first be previously heated using a blow-dryer or
similar instrument.
ATTENTION!
The nut 1 must be turned clockwise to be un-
screwed.
Extract the primary gear using the relevant extrac-
tor A (code 006140150000).
Notice that the primary gear houses the free wheel
device 2 inside of it, which can be removed by taking
out the circlip 3.
2
39