Beta Enduro RR 350 2015 Workshop Manual page 101

2
Positioning of gasket 1 and centring pins 2.
Application of complete inner clutch cover to right
crankcase half.
Positioning of M6x25 screws.
3.14
Apply a new gasket 1 placed between the right
crankcase half and the inner clutch cover using the
two reference pins 2 to keep it in place.
1
Couple the inner clutch cover to the right crankca-
se half and turn the water pump impeller until the
pump shaft inserts perfectly in the housing on the
countershaft which drives it.
Apply the nine M6x25 screws as shown in the figu-
re, tightening them by hand until they are flush.
ASSEMBLY of CoMPLEtE
CLUtCH CovER
3
99