Beta Enduro RR 350 2015 Workshop Manual page 14

1
Remove the frame guards 14 (one each side) and
the pinion guard 15.
15
14
Remove the rear wheel nut.
Extract the pin enough to allow the wheel to
advance towards the front of the vehicle.
Rotate the rear wheel lifting the chain in the
pinion zone, so that the chain of the pinion itself
is released.
Rest the chain against the upper wedge 16.
Remove the screws 6 fixing the clutch actuator to
the crankcase half.
16
17
ATTENTION! Do not activate the clutch lever with
actuator decoupled from engine.
Remove the head connections.
12