Beta Enduro RR 350 2015 Workshop Manual page 147

4
Connect the radiators to the engine.
Fasten the clamp straps and introduce the co-
olant liquid, letting the air bleed through the
screw cap A.
Apply the loading cap and fasten the bleed
screw at 10Nm.
A
Spurgo aria.
Apply the silencer to the vehicle, then the ex-
haust manifold; fasten according to the torque
10Nm
indicated in the figure.
Attention! Position the exhaust manifold in
order to have a 5÷10mm gap with the water
10Nm
hose.
15Nm
145