5
Two centring pins 5 dedicated to the flywheel cover
(carburettor version).
5
Two centring pins 5 dedicated to the flywheel cover
(injection version).
6
Nut 6 which fastens flywheel 7 to the crankshaft (car-
burettor version).
6
Nut 6 which fastens flywheel 7 to the crankshaft
(injection version).
Be careful of the two centring pins 5 on the
crankcase half.
Remove the tightening nut 6 which fastens
the flywheel 7 to the crankshaft.
7
Once the nut has been unscrewed, pay at-
tention to the special elastic washer (8
shown in the following images) placed
between the nut and the flywheel.
7
2
25