Beta Enduro RR 350 2015 Workshop Manual page 141

35Nm
35Nm
35Nm
Attachment
Bracket for head connection
to frame. Front attachment
Bracket for head connection
to frame. Rear attachment
Brackets for head connection
to motor
Motor pins
Fork pins
35Nm
35Nm
4
35Nm
35Nm
Screw
M8 x 20
M8 x 16
M8 x 65
Special
M16 x 245
5
Apply head connections.
.
Fasten the nuts and bolts following the table
below
Torque [Nm]
35
35
35
45
125
In the carburettor version, apply the carburettor
to the manifold making the breather tubes pass
in the appropriate metal cable gland.
In the injection versions, apply the throttle body
to the manifold.
Rotate the filter box in its normal position. Apply
the lower fixing screws 4 (one each side) prior
application of medium strength threadlocker and
fasten at 35Nm.
Tighten the upper screws 5 to 35Nm.
Note: We recommend removing the upper screws
(one each side) and apply medium strength
threadlocker.
Threadlocker
Medium resistance
Medium resistance
4
139