Beta Enduro RR 350 2015 Workshop Manual page 127

Added seeger.
Coupling cylinder to crankcase.
A
3
Once the pin bolt reaches its housing in the
foot of the connecting rod, push the pin bolt
inside until it is inserted all the way. Apply the
lug to the circlip 3 in the pin bolt seat. Insert
the cylindrical part of the special tool A into
the pin bolt and, having one of the two flat
surfaces of the tool coincide with the part of
the circlip to be inserted, turn and push the
special tool towards the engine until the circlip
is fully inserted into a seat.
Push the cylinder towards the crankcase ma-
king sure the two centring bushes on the left
crankcase are correctly inserted in the seats in
the lower part of the cylinder.
3
125