Beta Enduro RR 350 2015 Workshop Manual page 131

3
Lubricate the entire camshaft unit with motor
oil and apply the support 1, making sure it is
perfectly engaged both on the shafts and on the
centring pins.
Note: check the presence of the oil jets (par 1.17.11).
Apply the chain guide 2 and insert the three
M7x38 screws 3 in the holes on the chain side
and the four M7x33 screws 4 in the four remai-
ning holes.
4 1 4 4
4
3
2 3
3
Application of camshaft support 1, chain guide 2, three M7x38 screws 3 and four M7x33 screws 4.
129