Chapter 1 Before Using The Scanner; From Arrival Through Operation; Checking The Components - Fujitsu N7100E Getting Started

Chapter 1 Before Using the Scanner

1.1 From Arrival through
Operation
The following shows the flow from scanner arrival
through operation.
This manual provides information about Steps 1 to 5
shown below.
For information about Steps 6 to 9, refer to the manual
downloaded in Step 5.
1 Check package
"1.2 Checking the Components" (page 9)
2 Setup scanner
"Chapter 2 Setting up the Scanner" (page 11)
3 Configure scanner basic settings
"Chapter 3 Configuring Scanner Basic Settings"
(page 12)
4 Check network connection
"Chapter 4 Checking the Network Connection"
(page 16)
5 Download manual
"Chapter 5 Downloading the Manual" (page 17)
6 Install Admin Tool
Refer to the Operator's Guide.
7 Perform scan test
Refer to the Operator's Guide.
8 Configure required settings for scanner use
Refer to the Operator's Guide.
9 Operate scanner
Refer to the Operator's Guide.

1.2 Checking the Components

Make sure that all items shown below are included in the
package. If any other packaging is provided, make sure
to store it as well. Make sure to handle the components
with care.
If anything is missing or damaged, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner
service provider.
9
Scanner
AC cable
AC adapter
LAN cable (straight-through)
Getting Started (this manual)
Instruction
EULA Terms for Microsoft
®
Windows 10 IoT Enterprise 2019
LTSC
End-User License Agreement for
FUJITSU Image Scanner
N7100E/N7100EA Embedded
Software
®