Scanning Procedure; Step 1 Loading Documents - Fuji Xerox DocuCentre-IV C2263 User Manual

5 Scan

Scanning Procedure

This section describes the basic scanning procedure. The following shows the reference
section for each procedure.

Step 1 Loading Documents

The following two methods are available to load documents:
Document Feeder
Single sheet
Multiple sheets
Document Glass
Single sheet
5
Bound documents, such as books
Document Feeder
The document feeder supports single and multiple sheet documents with sizes from 125 x
85 mm (Standard size: A5, A5 ) to 297 x 432 mm (Standard size: A3, 11 x 17").
The document feeder automatically detects standard size documents. For non-standard size
documents, enter the size on the [Original Size] screen.
For information on document sizes that can be detected automatically and how to enter a non-standard document size,
refer to "Original Size (Specifying a Scan Size)" (P.324).
The standard document sizes that can be detected automatically depend on [Paper Size Settings] in the System
Administration mode. For information on paper size settings, refer to "5 Tools" > "Common Service Settings" > "Other
Settings" > "Paper Size Settings" in the Administrator Guide.
The document feeder accepts the following number of sheets.
Lightweight paper (38 - 49 gsm)
Plain paper (50 - 80 gsm)
Heavyweight paper (81 - 128 gsm)
Important • To avoid paper jams, use the document glass for folded or wrinkled documents,
For information on how to scan mixed sized documents, refer to ""Mixed Size Originals (Scanning Different Size Documents
Simultaneously)" (P.325).
1
Remove any paper clips and staples before loading a document.
250
Step 1 Loading Documents ....................................................................................................................................................... 250
Step 2 Selecting the Features ................................................................................................................................................... 252
Step 3 Starting the Scan Job..................................................................................................................................................... 255
Step 4 Confirming the Scan Job in Job Status...................................................................................................................... 256
Step 5 Saving the Scanned Data ............................................................................................................................................. 257
Document Type (Weight)
cut-and-pasted documents, curled paper, or back carbon paper.
• 2-sided scanning of lightweight paper (38 - 49 gsm) is not supported.
Number of
Sheets
110 sheets
110 sheets
75 sheets