Print; Print Features - Fuji Xerox DocuCentre-IV C2263 User Manual

Print

This section describes how to print with the machine by operating on a computer.

Print Features

The main print features of the machine are as follows:
Printing Using a Print Driver
For more information on print features, click [Help] on the print driver screen to view the print driver's help. For information
on printing, refer to "Printing" (P.409).
Note
Pages Per Sheet (N-UP)
Prints multiple pages onto one sheet of paper.
2-Sided Print
Prints data on both sides of paper.
Poster
Splits one page of print data into multiple sheets of paper and enlarges the printed image
to fit the size of each sheet. Used to create large posters.
Booklet Creation
Performs 2-sided printing and page allocation for printing a booklet in the correct page
order.
Watermark
Prints preset text, such as "Confidential", over the print data.
Secure Print
Temporarily stores the print data on the machine, to print it with the print command from
the machine. This feature allows you to set a passcode, which is helpful to print confidential
documents.
For information on how to print a Secure Print job, refer to "Secure Print" (P.390).
Sample Set
Before printing multiple sets of a document, you can first print one set for trial, and then
print the remaining sets from the machine.
For information on how to print a Sample Set job, refer to "Sample Set" (P.392).
Delayed Print
Temporarily stores the print data on the machine to print it at specified time.
For information on how to print a Delayed Print job, refer to "Delayed Print" (P.394).
Store in Remote Folder
Temporarily stores the print data in a registered folder, to print the data with the print
command from the machine.
Important • The print result of the Store in Remote Folder feature may be inferior to the other print results in
• Some features become available after you make option settings on the [Options] tab. The
unavailable features are grayed out.
quality.
Print
11
407