Using Folder Receive - Fuji Xerox DocuCentre-IV C2263 User Manual

Using Folder Receive

Files received using Folder Receive are stored in a folder. After a file is received in a folder,
the <Data> indicator lights up and the machine prints a Folder Report. The Folder Report
lists the folder number and folder name.
To receive files in a folder using the F Code method, notify the sender of the following
information:
F Code (sub-address): 0 (to designate F Code transmission) and the folder number to store
the file in
Password (if necessary): the passcode of the folder to store the file in
Note
Depending on the report print settings, a Folder Report may not be printed even after a file is received in a folder. For more
information on the Folder Report settings, refer to "5 Tools" > "Common Service Settings" > "Reports" > "Folder Report" in
the Administrator Guide.
For information on how to print a file stored in a folder, refer to "Printing Files in a Folder" (P.345).
• For IP Fax (SIP), the fax signal method and F code method are available.
• For IP Fax (SIP), in communicating via VoIP gateway, theSending to Folder with the fax signal
method is not available. Only the Sending to Folder with the F code method is available.
• The DTMF method is available for Remote Folder. The supported signals are numerals, "?", and "#"
only.
Receiving Faxes
4
245