Inserting A Usb Memory Device - Fuji Xerox DocuCentre-IV C2263 User Manual

Inserting a USB Memory Device

1
Insert the USB memory device into the USB memory slot on the control panel.
2
One of the following occurs.
The [USB Memory Device Detected] screen appears.
The [Store to USB] screen appears.
The [Media Print - Text] screen appears.
The screen display does not change.
Note
When the [USB Device Detected] Screen Appears
1
Select [Media Print - Text] or [Media Print -
Photos].
2
The [Media Print - Text] screen or the [Media
Print - Photos] screen appears.
• The behavior depends on settings. Ask your system administrator for more information.
• When a USB memory device is inserted into the USB memory slot during the Energy Saver mode, the
touch screen does not light. After exiting the Energy Saver mode by pressing the <Energy Saver>
button, insert the USB memory device again or select [Store to USB] on the [Services Home] screen.
For information on other ways to exit the Energy Saver mode, refer to "Exiting the Energy Saver
Mode" (P.58).
• The screen status will be one of the above even when a USB memory device in which only encrypted
data is stored is inserted or a USB memory device in unsupported format is inserted. In such a case,
a warning message appears during operation and the operation is aborted.
• The screen status will be one of the above when a commercially available Memory Card Reader is
inserted into the USB memory slot of the machine. It is the same if no medium is inserted into the
Memory Card Reader.
• If a commercially available Memory Card Reader is used and it is left inserted all the time, the
machine does not detect the medium even when they are inserted into the slot of the Memory Card
Reader.
• Screen display remains the same when the inserted USB memory device or Memory Card is
removed. Press the <Services Home> button or do anything else to change the screen display before
starting the next operation.
Inserting a USB Memory Device
375
9