Fuji Xerox DocuCentre-IV C2263 User Manual page 49

Finisher-B1 (optional)
14
13
12
11
No. Component
1 Tray attachment
2 Booklet unit (optional)
3 Booklet unit side cover
4 Booklet staple cartridge
5 Top cover
6 Finisher tray
7 Creaser unit
8 Staple cartridge
9 Front cover
10 Finisher-B1 (optional)
11 Front transport cover
12 Hole-punch waste container
13 US 2/3 Hole Punch Kit
(US standard) (optional)
2/4 Hole Punch Kit
(optional)
Install this attachment when delivering A4
tray without stapling.
For more information, refer to "Installing the Tray Attachment on the Finisher-B1" (P.71).
Staples creased outputs.
Open this cover when replacing the booklet staple cartridge.
Contains staples. Remove this cartridge when replacing or adding staples, or
clearing staple jams.
Open this cover to clear paper jams.
Stapled or creased outputs are delivered here.
Creases outputs in half.
Contains staples.
Open this cover when clearing paper jams or replacing staples.
Staples copies or prints.
Open this cover when discarding punch scraps.
Collects scraps from the puncher.
Hole-punches outputs.
Note • The distance between the two holes made with the US 2/3 Hole Punch
Kit (US standard) is 70 mm, which is different from the 80 mm distance
made with the 2/4 Hole Punch Kit.
Machine Components
1
2
3
4
5
6
7
8
9
10
Function
or B5 paper to the finisher
2
49