Fuji Xerox DocuCentre-IV C2263 User Manual page 44

2 Product Overview
Left side and rear views of the machine
2
No. Component
1 Top left cover E
2 Top left cover A
3 Top left cover D
4 Bottom left cover B
5 Bottom left cover C
6 Adjusting foot
7 RESET button
8 EP interface
9 USB 2.0 interface connector
10 USB 2.0 interface connector
11 USB 2.0 interface connector
12 USB 2.0 interface connector
13 10BASE-T/100BASE-TX
connector
44
8
9
10
11
12
13
7
Open this cover to clear paper jams.
Open this cover by pressing the release lever to clear paper jams.
Open this cover by pressing the release lever to clear paper jams.
Open this cover to clear paper jams.
Open this cover to clear paper jams.
Prevents the machine from toppling over. Move the machine to its
installation site and then rotate this adjuster in clockwise direction until it
touches a floor.
Automatically switches the machine off when a current leakage is detected.
Used for using the EP (Electronic Partnership) system.
Note • The EP system restores the current status of the remote machine.
Connects a USB cable for a maintenance port.
Connects a USB memory cable for printing.
Connects a USB cable for fax.
Important • This connector can be used only for fax. It cannot be used for other
purposes.
Connects the USB cable of a device such as a card reader.
Important • This connector can be used only for optional components or associated
products provided by Fuji Xerox.
Connects to a network cable.
1
2
3
4
5
6
Function