Fuji Xerox DocuCentre-IV C2263 User Manual page 315

1
Select [Computer].
2
Load the document on the document glass or
in the document feeder, and select [Operate
From Computer].
3
The stanby screen is displayed on the touch
screen.
Note • Select the [Delete] button to exit stanby
mode. After exiting stanby mode, the
[Remove Your Originals] screen is displayed
on the touch screen.
4
Operate scan from a network computer. To operate scan from a network computer, use an
application which supports image loading feature such as [Windows Fax and Scan].
The following describes the method using [Windows Fax and Scan] with Windows 7.
Note • This method is not available for computers with Windows Vista Home Basic or Windows Vista Home
Premium. To operate scan from such a computer, use another method, such as [From Scanner or
Camera] in the Paint application.
1) Click the [Start] button, click [All Programs], and then click [Windows Fax and Scan].
2) Click [Scan] at the bottom of the left pane, and then click [New Scan] on the toolbar.
3) In the [New Scan] dialog box, click [Change], and then select the machine.
4) Check that the machine model name is displayed to the right of [Scanner:].
Note • If the machine model name is not displayed, click [Change] and select the machine.
5) Click the [Profile] list, and then select [Document].
6) Specify the settings as necessary, and then click [Scan].
5
After being scanned, the scanned data is forwarded to the specified computer.
6
The [Remove Your Originals] screen appears on
the touch screen after a scan job has been
completed. Remove the originals from the
document glass or the document feeder, and
then select [OK].
Note • If the standby screen is not displayed, a scan
job will not be started even when the network
computer recognizes the machine.
• Select the [Delete] button to abort an
operation. After an operation is aborted, the [Remove Your Originals] screen is displayed on the
touch screen.
• The machine will not enter the Energy Saver mode while the standby screen is displayed. For
information on the Energy Saver mode, refer to "Energy Saver Mode" (P.57).
Store to WSD
5
315