Screens And Buttons Displayed - Fuji Xerox DocuCentre-IV C2263 User Manual

Screens and Buttons Displayed

You can register or change the services and buttons displayed on the touch screen. You can
customize the following screens:
Note
Setting the Initial Screen
You can set the screen displayed after switching the power on or exiting the Energy Saver
mode.
Setting the Screen Displayed after Auto Clear
You can select [Last Selection Screen] or [Services Home] for the screen to be displayed after
Auto Clear.
Assigning Services to the Custom Buttons
You can assign services to the custom buttons on the control panel: Custom 1 to Custom 3.
By assigning frequently-used services to the custom buttons, you can switch to the services
without returning to the [Services Home] screen.
Note
Customizing the [Services Home] Screen
You can customize the layout of services and buttons on the [Services Home] screen that is
displayed when you press the <Services Home> button on the control panel.
For information on how to customize the [Services Home] screen, refer to "1 Before Using the Machine" > "Customizing the
Control Panel" > "Customizing the Button Layout" in the Administrator Guide.
• The following screens and buttons may have been changed by the system administrator. Use the
machine according to the changes being made.
• By default, "Copy" is assigned to the <Custom Button 1>, and "Review" is assigned to the <Custom
Button 3>. No service is assigned to the <Custom Button 2>.
Control Panel
2
65