Power Source; Switching The Main Power On - Fuji Xerox DocuCentre-IV C2263 User Manual

Power Source

The machine is provided with the power switch and the main power switch.
Power switch
To use the machine, press the power switch to
the [ | ] position to switch its power on. You can
start operations after the machine warms up.
Main power switch
Press the main power switch to the [
position. The <Main Power> indicator goes out
on the right side of the control panel, and the
machine powers off. Do not switch the main
power off except when you connect a cable to the machine or clean the machine. Switching
off the main power may erase the data in the memory when using the Fax service.

Switching the Main Power On

The following describes how to switch the main power on.
Important • Do not switch off the main power immediately after switching on the main power. This may
1
Make sure that the power cord is plugged in correctly.
2
Open the front cover.
3
Press the main power switch to the [ | ] position
to switch the main power on.
The <Main Power> indicator lights up on the
control panel.
4
Close the front cover.
damage the hard disk and the memory or cause a machine malfunction.
]

Power Source

Power switch
Main power switch
2
51